Twist 60 Panniers – Rail System


Twist 60 bicycle panniers with Rail System are panniers made of the most durable material from which bicycle panniers are made. They are durable, waterproof and equipped with our newest and most universal mounting system, i.e. Rail.

Their quality is determined by the material: TPU Cordura is durable, lightweight and has an internal polyurethane layer resistant to bending and difficult weather conditions.

If you like to buy equipment that lasts a long time, and during your trips you prefer to enjoy the views in peace instead of worrying if your panniers will survive rubbing against a concrete wall, then Twist panniers will be the perfect choice.

Twist 60 bicycle panniers are welded, seamless bags with rolled closure for waterproofness in the rain or even during a momentary full submersion.

The offer applies to two panniers (2×30 liters) mounted on the rear bicycle rack.

In stock


Polyurethane is a plastic material that we use to coat Cordura. It ensures very precise, strong and tight welding of the pannier in high frequency (so-called HF). We are the only manufacturer of bicycle panniers in Poland and one of the few in Europe using this technology which:

  1. makes Cordura fully sealed
  2. is soft and pleasant to the touch
  3. compared to materials with PVC coating:
    a) has better adhesion to the carrier (Cordura) – higher durability,
    b) has better resistance to mechanical damage, such as friction,
    c) withstands more kneading cycles – does not flake off on bends,
    d) stiffens less during frost,
    e) retains a fresh look for longer,
    f) does not contain PVC;

Panniers from the above offer are equipped with the RAIL MOUNTING SYSTEM, which is shown in the photos in the gallery below. The photos are for reference only and the panniers shown in them may differ from the ones in the above offer.

The main advantages of the Rail mounting system are:

  • smooth adjustment of the spacing of the upper hooks on the rail - in the Click System, adjustment takes place at designated points,
  • the hook lock has a spring which reduces the play between the hook and the spring with its clamp, so that the pannier sits tightly and does not knock while driving,
  • the lower hook is adjustable in the horizontal axis and can be rotated around its axis,
  • easy adjustment to different models of racks,
  • can be disassembled with a Phillips screwdriver (e.g. for transport),
  • the top rail is made of aluminum, and the hooks are made of even more durable material than in the Click System,
  • the eyelets to which the handle is attached are also the attachment points for the strap for carrying the pannier on the shoulder - you can buy it separately;

Panniers with the Rail mounting system can be mounted on bicycle racks with a tube diameter between 8 and 16 mm. After putting on the pannier, the system adjusts itself to the diameter of the rack.

Weight 1,440 kg
Dimensions 35 × 16 × 44 cm
Data and price for


Mounting system

Closure system

Method of panel connection

Reflective elements

Main material


Location on the bike


, ,


Maximum load

You may also like…

    Your Cart
    Your cart is emptyReturn to Shop
      Apply Coupon