Bicycle racks and accessories

The Crosso bicycle racks presented below are suitable for mounting bicycle panniers with both Crosso and Click mounting systems. You can read a comparison of both types of pannier mountings here, but you don’t have to do it at the stage of buying a rack – this is important only when you decide which panniers to buy for your trips!

Stalowy bagażnik rowerowy tylny z krótki prętami i nowymi śrubami
Steel rear bicycle rack

Steel rear bicycle rack

399,00 409,00 

In stock. Shipping in 24h

A steel bicycle rack is our answer to the needs of bicycle travelers going on multi-month expeditions away from large urban agglomerations. This rack will easily carry all the necessary equipment, water and food for long days during the expedition. It also provides a sense of security, as our priority in the design process was its durability. Every weld and every tube bend was made with due care by Polish craftsmen who know their craft perfectly. As practicing cyclists, we know that accidents and unforeseen incidents during bicycle trips are not uncommon - so we provide you with equipment that is not only durable, but also repairable in the field. Our new expedition rear bike rack is made of steel, which is not only durable, but also the rack can be easily welded in the event of damage. If something happens that requires repair, you can go to the first owner of the welding machine you meet, e.g. a car mechanic, to have it repaired - you can do it right away, unlike a rack made of aluminum, the welding of which is a more difficult process and requires a special welding machine, which is more difficult to find outside larger cities. The rack is available in two variants: 180 and 250 mm - they differ in the length of the mounting rods. Before purchasing, please refer to the technical drawing (link below). Transfer the given dimensions to your bicycle frame and check whether you will need longer rods or whether shorter ones will suffice. The upper mounting points are smoothly adjustable in all planes in both variants.
Bagażnik rowerowy tylny z krótki prętami i nowymi śrubami
Aluminum rear bicycle rack

Aluminum rear bicycle rack

199,00 209,00 

In stock. Shipping in 24h

The rear bicycle rack is a professional, aluminum expedition rack with an impressive load capacity of 35 kg. Crosso rear rack has been installed on the bicycles of travelers traveling on and off-road all over the world for years. The rack is compatible with all three mounting systems from our offer - Rail, Click and Crosso, but you can also easily attach panniers from other manufacturers with various carrying systems. The rack is available in two variants: 180 and 250 mm - they differ in the length of the mounting rods. Before purchasing, please refer to the technical drawing (link below). Transfer the given dimensions to your frame and check whether you will need longer rods or whether shorter ones will suffice. The upper mounting points are smoothly adjustable in all planes in both variants.
Front bicycle rack
Crosso low-rider front rack

Crosso low-rider front rack

179,00 

In stock. Shipping in 24h

The low-rider front bicycle rack (aluminum) boasts an impressive load capacity of 15 kg, making it the choice of bicycle travelers touring the roads and wilderness around the world for years. The low-rider rack is compatible with a fork leg diameter of 25-50 mm. A unique mounting system using v-brake mounting provides exceptional structural rigidity. Additional mounting points on the fork are not required. However, if your fork has a threaded hole on the side, you can use it instead of the clamps provided in the set. The v-brakes themselves are not actually necessary to mount the rack, but their pivots are. So if your bike has disc brakes, but at the same time has unused mounting points for v-brakes, you will be able to install our front rack on your bike.
Front rack clamp

Front rack clamp

19,00 

In stock. Shipping in 24h

Clamp for mounting Crosso Low-Rider front rack for forks with a maximum leg diameter. The set includes: - 1 clamp - 1 rectangular washer - 2 acorn nuts - 2 washers for nuts Material: steel with an anticorrosive layer. The clamp and rectangular washer are coated with rubber which protects the fork leg from scratches.
Bicycle rack covers

Rack covers

8,00 

In stock. Shipping in 24h

Bicycle rack covers protect it from being scratched by the steel hooks of the Crosso carry system. The set consists of four covers made of durable plastic and four double-sided 3M adhesive sheets. Bicycle rack covers are designed for racks made of tubes with a diameter of 10 mm. Each set of new Crosso carry system panniers contains a set of such covers.
Tension lock adapter
Tension lock adapter (2 pcs)

Tension lock adapter (2 pcs)

20,00 

In stock. Shipping in 24h

Panniers with the Crosso mounting system require an eyelet at the bottom of the rack for tension lock installation. If your rack does not have one, all you need is this adapter. Another possibility offered by the adapter is lowering the height of the Crosso rack. After replacing the standard mounting plate with the adapter, the height of the rack will be reduced by 20 mm. This will lower the center of gravity of the loaded bicycle, which is desirable for improving riding quality.
Rack adapter for disc brakes

Rack adapter for disc brakes

39,00 

In stock. Shipping in 24h

The rack adapter for disc brakes is optional. Sometimes the placement of the rear disc brake makes it impossible to install the Crosso rack. In most cases, our adapter is the perfect solution to this problem. There are several sizes of the adapter available in our offer. Before you make a purchase, measure the distance needed so that the rack doesn't come into contact with the brakes. Then, choose the right size below.
Mounting bars (25 cm) for the rear Crosso bicycle rack

Mounting bars (25 cm) for the rear Crosso bicycle rack

45,00 

In stock. Shipping in 24h

Mounting bars for the Crosso rear bicycle rack, 250 mm long. They allow the rack to be mounted to the bicycle frame, when supplied with rear rack the 180 mm long bars turn out to be too short. The 25 cm long mounting bars will be a must for people whose bike frames are small or whose top mounting points are low in relation to the bicycle rack. Long bars can also be helpful when the bike user is tall and hits the panniers with his heels. Thanks to the longer bars, we can tilt the rack backwards, which makes the pannier move away from the heel. The mounting bars come with a set of screws and fixings.
Rear rack ‘C’ adapter
Rear rack 'C' adapter

Rear rack ‘C’ adapter

17,00 

In stock. Shipping in 24h

The rear rack 'C' adapter makes it possible to mount Crosso rear racks on bicycle frames which do not have screw threads on the side for mounting upper handles. In order to use it, the frame must have an element (flat bar, tube) with a through hole above the back wheel (the same one that is used for installing a fender or a retroreflector). The rear rack 'C' adapter is supplied without screws, nuts, and washers.
    0
    Your Cart
    Your cart is emptyReturn to Shop
      Apply Coupon